> Our products>Monepox

MONEPOX® AQ
A waterbased 2 component epoxy emulsion available in different RAL colours. The coating has a satin finish and has a good chemical resistance. It can be used for light to medium traffic. Monepox® AQ can be applied on a wet substrate and is odourless. Monepox® AQ can be used in: corridors, cellars, exhibition rooms, canteens, light industries, etc...
The product is easily applied with a roller.

MONEPOX® SL
This self levelling 3 component mortar is available in different RAL colours. It is designed for industrial floors where a smooth and seamless finish is required combined with a good mechanical and chemical resistance. The floor tickness is 2-3mm with a smooth finish and 4-5mm with an antislip finish. Monepox® SL can be used in: food, mechanical and chemical industries, in dairies, pharmaceutical plants, hospitals, the car industry and the paper and printing industry.Monepox® SL has been tested at the Polymer Institut in Germany and has received the OS8 classification.

MONEPOX® HD
Monepox® HD is formulated as a heavy duty epoxy mortar for applications requiring superior impact and abrasion resistance combined with a good chemical resistance. Monepox® HD is applied in a thickness from 4-6mm and can be delivered in different multi-colour combinations. the mortar can be mechanically finished and is easy to clean.

MONEPOX® 110
Monepox® 110 is a high solid epoxy coating available in different RAL colours with a high chemical resistance. It can be applied on various vertical and horizontal substrates. Monepox® 110 is designed for light to medium traffic and can be finished as a smooth or antislip surface.

PRODUCTS IN THE MONEPOX® SYSTEM

MONEPOX® SG
A multifunctional epoxy system, wich can be used as a binder or a transparent topcoat for the Monepox® SL. Monepox® SG has been tested at the Polymer Institute in Germany.

MONEPOX® FIX
A clear and good weather resistant floor dustbinder and impregnation product to prevent absorption of liquids. It can be applied on concrete and metal.

MONEPOX® PRIMER 103S
A low viscosity primer for deep penetration into old and new concrete. It provides an excellent bond for all the Monepox® systems.

MONEPOX® HARDTOP
A one component polyurethane sealer for the Monepox® systems. Gives the surfacewire a high scratch resistance and a satin finish.

MONEPOX® - Technical Details

Physical properties MONEPOX® AQ MONEPOX® SL MONEPOX® HD MONEPOX® 110
Compressive strenght: >2 N/mm²
60°C
24h
97 N/mm² 70 N/mm² >2 N/mm²
60°C
24h
>10¹³ ohms
Flexural tensile strenght: 41 N/mm² 50 N/mm²
Tensile strenght: 18 N/mm²  
E-modulus (in flexure): 8400 N/mm² 2200 N/mm²
Elongation at break: 3%  
Shock resistance: 3 KJ/mm² 6 KJ/mm²
Adhesion: >3,3 N/mm² >2,5 N/mm²
Heat resistance: 65°C 65°C
Polymerisation: 24h 24h
Electrical resistance: >10¹³ ohms >10¹³ ohms
Resistance Taber Test (mg/1000u): 88 80
Fire resistance: class 1 class 1

For more details, see the "Technical specifications"


Return

© @cte Net - Solutions Web